How to Setup and Adjust the Dynamic Compensation of Feedforward Signals Webinar

Update 2: The Modeling and Control blog has a nice deminar summary page with links to all the seminar/demos.

Update and bump: Here is the video recording (download 645Mb) and presentation (download) for today’s demo/webinar:

Viewing this content requires Silverlight. You can download Silverlight from http://www.silverlight.net/getstarted/silverlight3.

Original post: Modeling and Control blog’s Greg McMillan resumes his on-line web seminar / demo series with one scheduled for tomorrow, January 5 at 10am CST / 16:00 UTC. The title is How to Setup and Adjust the Dynamic Compensation of Feedforward Signals. In this demo/seminar (a.k.a. deminar), Greg will explore the adjustment of feedforward delay, lead-lag, and gain for the traditional PID and the smart PID for wireless devices.

To join us live, visit http://bit.ly/JC-LiveMeeting. Computer audio will be available. Should you encounter any difficulties, here are dial in alternatives:

  • Toll-free: +1 (877) 771-7176
  • Toll: +1 (225) 383-1099
  • Participant code: 264679

Greg Mc Millan Deminar Recording
I’m peeking at some of the slides that he’ll share, and which we’ll post along with Greg’s others in SlideShare. He explains that feedforward is the most common advanced control technique used. Often the feedforward signal is a flow or speed for ratio control that is corrected by a feedback process controller. Flow is the predominant process input that is manipulated to set production rate and to control process outputs (e.g. temperature and composition).

Feedforward is most effective if the loop deadtime is large, disturbance speed is fast and size is large, feedforward gain is well known, and feedforward measurement and dynamic compensation are accurate. Setpoint feedforward is most effective if the loop deadtime exceeds the process time constant and the process gain is well known. Greg shared some of these ideas in a ControlGlobal.com column co-authored with Stan Weiner, Feeding on Feedforward.

If you’re not able to join us for the live session, please visit our archive of web seminar / demo recordings. We’ll post this one a few hours after the live session and update our posts here on this blog and at the ModelingandControl.com blog.

Leave a Reply