« Material Management in Highly Regulated Facilities | Main
Analyzing the 10 Truths of Safety Instrumented Systems
by Jim Cahill
After reading about the "10 Truths of Safety Instrumented Systems" in a ControlGlobal.com email (Control Magazine's online website), and getting a copy, I'd spoken to our of our safety experts, Andrew Dennant, and was working up an analysis of the 10 truths...
...and then I read the comments of Nova Chemical and ISA Safety Division Newsletter Editor/Webmaster Brian T. Smith on Walt Boyes' SOUND OFF!!! blog.
Andrew and I will add just one point to the discussion underway.
When thinking about availability, consider the entire safety loop, not just the logic solvers, since the majority of failures occur outside the logic solver. An analysis of the data sources like the Offshore Reliability Database (OREDA) and exida’s Safety Equipment Reliability Handbook shows that up to 92% of hardware failures happen in the field and only 8% happen in the logic solver. Studies by the Health and Safety Executive in the UK show that less than 15% of all failures are hardware-related. Doing the math, 15% x 8% = 1.2%, puts us in the range of failures that are caused by the logic solver.
The key to high process availability is having a smart SIS which diagnoses the complete safety function including the logic solver, sensor, and final control element, correctly engineered in accordance with globally-agreed best practice safety standards, aka IEC 61511.
Technorati Tags: IEC 61511 | safety instrumented system | SIS | safety integrity level | SIL | SIF |
May 11, 2006 in Safety | Comments (0) | TrackBack (0)
TrackBacks
TrackBack URL for this entry:
http://www.emersonprocessxperts.com/MT/mt-tb.cgi/79
Listed below are links to weblogs that reference Analyzing the 10 Truths of Safety Instrumented Systems:
